Q69 — Component Configuration Control / TSAS Positioning
G2.2.14 (3.9)
A one (1) hour or less Technical Specification Action Statement (TSAS) requires a component to be positioned to the CLOSED position.
In accordance with OP-AA-108-101-1002, Component Configuration Control, the component will be positioned by _(1)_ and then the INDEPENDENT VERIFICATION (IV) will be performed _(2)_.
In accordance with OP-AA-108-101-1002, Component Configuration Control, the component will be positioned by _(1)_ and then the INDEPENDENT VERIFICATION (IV) will be performed _(2)_.
A. _(1)_ Abnormal Component Position Sheet (ACPS)
_(2)_ As soon as practicable after the TSAS was entered
_(2)_ As soon as practicable after the TSAS was entered
B. _(1)_ Tagout
_(2)_ Within the one (1) hour action time
_(2)_ Within the one (1) hour action time
C. _(1)_ Abnormal Component Position Sheet (ACPS)
_(2)_ Within the one (1) hour action time
_(2)_ Within the one (1) hour action time
D. _(1)_ Tagout
_(2)_ As soon as practicable after the TSAS was entered
_(2)_ As soon as practicable after the TSAS was entered
▶ Show Answer & Explanation
✓ C. Correct. The procedure states that for 1 hour or less TSAS, an Abnormal Component Position Sheet (ACPS) will be used to position the component and the component position will be IV-ed within 1 hour of entering the TSAS. (See OP-AA-108-101-1002, step 5.1.4.1.A.)
✗ A. Incorrect. The first part is correct. The second part is plausible because if the TSAS was greater than 1 hour, OP-AA-108-101-1002 states that a tagout may be applied as soon as practicable after the TSAS was entered. The candidate may confuse the use of a tagout for greater than 1 hour TSAS with the requirements for less than 1 hour TSAS.
✗ B. Incorrect. The first part is plausible because if the TSAS was greater than 1 hour, OP-AA-108-101-1002 states that a tagout may be applied as soon as practicable after the TSAS was entered. The candidate may confuse the use of a tagout for greater than 1 hour TSAS with the requirements for less than 1 hour TSAS. The second part is correct.
✗ D. Incorrect. Plausible because if the TSAS was greater than 1 hour, OP-AA-108-101-1002 states that a tagout may be applied as soon as practicable after the TSAS was entered. The candidate may confuse the use of a tagout for greater than 1 hour TSAS with the requirements for less than 1 hour TSAS.
Ref: NOS05MISCAP-08, Configuration Control & Related Procedures; OP-AA-108-101-1002, Component Configuration Control | LO: ELOs 6 & 8 | Source: Modified – Salem Vision Database | Cognitive: Comprehension
Connections
- Related procedures: OP-AA-108-101-1002 — Independent/Concurrent Verification
- Related exam: 2020 NRC Written Exam